This powerful new equipment for high Speed press working, and will work
at increasing precision pressing quality and quantity.
Two sections type straightening device, it is no need to is no need to
adjust straighten function when rolled material is under straightening
process (from start to end) . To ensure the material at same flatness
- Fine electric parts
can not be finished with high accvracy only smoothing out of coil materials
may be accomplished. So thin materials need to be straightened, and
stress moderately removed.
- After straightening,
materials can be curled curled upward or downward or flat easily.
- As bearings of
work-rolls are, of a oiling, lubricating free type there is on trouble
from the adherence of oil or dirt.
- The drive unit
is controlled by an inverters (cycle control) to feed smoothly at a
speed synchronized with the press